Primary Containment Archives | Page 2 Of 9

RubberSource natural rubber has excellent physical properties such as; elongation, resilience, tensile strength, abrasion and a wide range of chemical resistance. RubberSource’s catalog of pre-cured economic NR rubber with excellent physical properties but for less regirous applications.

RS-55 DC

RSswap2023-10-23T13:20:23-04:00July 19, 2023|

RS-55DC, Aromatic Fast-Set Polyurea Spray System is a fast-set, spray applied, two component polyurea that is 100% solids and contains Zero VOCs. It is highlighted by: • Excellent corrosion protection and chemical resistance. • Excellent impact resistance even in sub-freezing weather. • High abrasion [...]

RS-60 DM

RSswap2023-10-23T13:26:54-04:00July 19, 2023|

RS-60DM, Aromatic Fast-Set Polyurea Spray System is a fast-set, spray applied, two component polyurea that is 100% solids and contains Zero VOCs. It is highlighted by: • Excellent corrosion protection and chemical resistance. • Excellent impact resistance even in sub-freezing weather. • High abrasion [...]

RS-60 DM- FR

RSswap2023-10-23T13:28:29-04:00July 19, 2023|

RS-60DM-FR, Class 1 Fire Rated Polyurea Coating is a fast set, spray applied, two component polyurea hard coat. It is 100% solids and contains Zero VOCs. It is highlighted by: Superior toughness and tear resistance. •Passes ASTM Designation E84: “Standard Method of Test for [...]

RS-2000 Rubber Cement

RSswap2023-10-23T12:50:27-04:00July 19, 2023|

RS-2000 Cold Bond Rubber Cement is suitable for all applications of bonding rubber to: Rubber, metal, concrete, wood and many other materials. The use of trichloroethylene as the solvent system results in the development of a nonflammable rubber based adhesive. Useful in all applications [...]

RS-2000E Rubber Cement

RSswap2023-10-23T12:56:05-04:00July 19, 2023|

RS-2000E Cold Bond Rubber Cement is one a non-Trichloroethylene based chloroprene rubber adhesive products that offers improved bond strengths and cold weather performance over our competitor’s traditional two part products.RS-2000E is a two component, room temperature curing, solvent based chloroprene rubber adhesive/cement that when [...]

RS-265

RSswap2023-10-23T12:58:05-04:00July 19, 2023|

RS-265, Polyurethane Coating and Lining is a 1:1, direct to metal, fast-set, spray applied two-component polyurethane coating. It is 100% solids and contains zero VOCs. When cured, it is highlighted by: • Excellent adhesion to steel • Minimal overspray or fog in application area [...]

RS-30

RSswap2023-10-23T14:36:28-04:00July 19, 2023|

RS-30 Polyurethane Primer for Concrete a two component polyurethane primer for concrete that is to be top coated with RubberSource’s line of polyurethanes and polyurea.It is highlighted by: • Superior wetting of substrate. • Very good chemical adhesion to the top coat. • Low [...]

RS-3500 Polychloroprene Cement

RSswap2023-10-23T13:06:21-04:00July 19, 2023|

RS-3500 Polychloroprene Based Tack Cement is a premium grade tack cement formulated with high quality polychloroprene rubber dissolved in solvent. It is designed specifically for use in lining operations when bonding neoprene rubber lining. S-3500 provides exceptional green strength while allowing for repositioning of [...]

Pre-Cured RS-E665

RSswap2023-10-23T12:41:05-04:00July 19, 2023|

RS-EP65 Pre Cured Black EPDME thylene Propylene Diene Monomer is known for working in operating temperature ranging from -45°C to + 120°C. It is highly recommended for outdoor applications as it is extremely resistant to oxidation, UV Rays, Water, Weather and Ozone.However, EPDM does [...]

Pre-Cured RS-V55

RSswap2023-10-23T14:34:48-04:00July 19, 2023|

RS-V55 Pre Cured Black Viton®Black Viton® sheet provides excellent resistance to heat, oil and chemicals. These properties make Viton® sheet well suited for hot grease, engine and compressor type applications. In addition this fluoroelastomer sheet is resistant to a wide range of concentrated acids. [...]

Previous 123 Next

Primary Containment

Rubber Source Calculator

Associations and Awards