polyurea coatings gold standard | RS-265


RS-265, Polyurethane Coating and Lining is a 1:1, direct to metal, fast-set, spray applied two-component polyurethane coating. It is 100% solids and contains zero VOCs. When cured, it is highlighted by:
• Excellent adhesion to steel
• Minimal overspray or fog in application area
• Formulated without plasticizers, tar, or other hydrocarbon extenders
• Certified to meet ANSI/NSF 61 standards for potable water by Underwriters Laboratories
• Certified (3rd party) to meet or exceed all requirements of AWWA C-222-08 protocol

mining equipment protection | RS-265


Hardness, (ASTM 2240): 77 Shore D
Adhesion to Steel (D-4541 SP10, 3.0 mil): 3200 psi (225 kg/cm²)Elongation (D-638): 6%
Impact Strength (direct), G-14: >85 lbs
Flexibility (1800 bend over 3 inch (7.62cm) mandrel) D-522: No Cracking
Abrasion Resistance (CS17 wheels, 1000g, 1000 cycles, (D-4060): < 55 mg loss Dielectric strength, D-14: 9> 600 volts/mil

Typical Uses

Mining Equipment
Fuel loading and un-loading


Abrasion Resistant
High resilience
Reduces corrosion
Minimize down times of application

Download Product Information

Request a Lining Recommendation and Quote or Find a Qualified Installer

Go to Top